Matched SWR : 2.00 1 in Stock : FC30 : YAESU FC30: BOLT-ON ANTENNA TUNER for FT-897/D 234. Maximum Input Power : 100W (3 minutes MAXIMUM continuous TX) 8-30MHz Assembled For 5-100W Shortwave Radio Stations ATU-100 22 reviews COD.Covers 7 to 54 MHz with YA-007 HF 2.5m mobile whip antenna.Operating frequency range : 1.8 to 54MHz with 20+m end-fed wire.The FC-40 sports a whopping 200 match-setting-point memories, for instant recall of the tuning settings Matching time is typically five seconds or less, and the required drive power is 4 ~ 60 Watts. The FC-40 is designed for operation on 7 ~ 54 MHz, when using an 8ft whip like the YAESU YA-007, or on 1.8 ~ 54 MHz when used with a random-length wire longer than 66ft. Fully waterproof, the FC-40 may be mounted outdoors in exposed locations, and will handle a 100 Watts of transmitter power. The FC-40 makes use of control circuitry inside the transceiver, allowing the operator to monitor and control operation of the FC-40, which mounts near the antenna feedpoint. The FC-40 is a microprocessor-controlled antenna impedance matching network designed for use with the FT-950, and all versions (original and "D") of the FT-450, FT-857, and FT-897 HF/VHF/UHF Transceivers. To tune the ATAS-100/-120 manually, recall Multi Function Row k TUNE, DOWN, UP, then press and hold in the microphone PTT switch.
#YAESU FC 30 ANTENNA TUNER MANUAL#
This tuner is to be used with an end-fed random wire or long whip antenna. Yaesu FT-857D manual : FC-30 Automatic Antenna Tuner Operation. The Yaesu FC-30 Automatic Antenna Tuner responds to control commands from the Yaesu FT-897 Transceiver, providing microprocessor-based impedance matching on the. Micro-processor controlled antenna impedance matching network designed to provide all-amateur band transmitting capability with many of Yaesu's transceivers, such as the FT-950, FT-450, FT-897 and the FT-857. FC-40 automatic-matching 200memory antenna tuner